How to Create an Easy Trim Accent Wall
Learn how to create an easy trim accent wall with this step-by-step tutorial. Transform your space with simplicity and style.
Active Time3 hours hrs
Total Time3 hours hrs
Yield: 1
Author: Heather Painchaud
Cost: $75
- 8 pieces of 1" x 1/4" birch trim - 6ft lengths were $8 at Home Depot
- Fine grit sanding paper
- Finishing nails
- Ryobi brad nailer - this is the one I have
- Level
- Painters Tape
- Mitre saw or hand saw
- Stud Finder
- Wood Filler
- Varathane
- Paint Brush
Prep the trim either with paint or varathane to seal.
Sand the trim and apply a second coat of sealer if needed.
Use painters tape to map out the design on the floor.
Measure each length of tape and cut each piece of trim to length.
Make sure to use a level to get the first horizontal piece just right.
Use a stud finder to find the studs and use a finish nailer to nail the trim into them.
Continue with each section of trim, about 1” apart.
Fill the nail holes with wood filler.
Coat with varathane to seal.