Graphic Trim Art Piece
Graphic Trim art Piece for a Mudroom
Active Time4 hours hrs
Total Time4 hours hrs
Yield: 1
Author: Heather Painchaud
- 8 pieces of 1″ x 1/4″ primed trim – 6ft lengths were $8 at Home Depot
- Finishing nails - the shorter the better
- Ryobi brad nailer – this is the one I have
- Plywood - cut to the size you want the art ours was approx. 44" x 58"
- Painters Tape
- Mitre saw or hand saw
- Wood Glue
- Paint - our color is Track Green by Sherwin Williams
- Paint Brush
Cut the plywood to size.
Measure the each side of the plywwod and cut trim to create a frame around the edges.
Use the wood glue and brad nails to fasten the trim to the plywood.
Now use the painters tape to create a graphic design on the interior of the plywood.
Measure the accent trim pieces and cut them to length and size.
Fasten each piece of trim to the plywood using brad nails and glue.
Paint the entire piece your color of choice.
Hang with hooks and wire.